OPTIFLUX 5100

Electromagnetic flowmeter for demanding applications with aggressive and abrasive media

  • With chemically resistant ceramic tube for liquids with solid content (≤10%)
  • Up to +180°C / +356°F
  • Flange: DN15…300 / ½…12", max. PN40 / ASME Cl 300; Sandwich: DN2.5...100 / ⅒...4"
  • 4…20 mA, pulse, frequency, status, HART®

OPTIFLUX 5100

Electromagnetic flowmeter for demanding applications with aggressive and abrasive media

  • With chemically resistant ceramic tube for liquids with solid content (≤10%)
  • Up to +180°C / +356°F
  • Flange: DN15…300 / ½…12", max. PN40 / ASME Cl 300; Sandwich: DN2.5...100 / ⅒...4"
  • 4…20 mA, pulse, frequency, status, HART®

Overview

The OPTIFLUX 5100 is an electromagnetic flowmeter (EMF) with a high-tech ceramic measuring tube for demanding process flows. It is particularly suited for applications in the chemical processing industry, the minerals and mining sector as well as in any other sectors of industry where highly aggressive or abrasive liquids occur. The EMF is the ideal solution for harsh process conditions with temperatures up to +180°C / +356°F, aggressive chemicals and solid content (up to 10%).

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)
  • Withstands highly aggressive and abrasive fluids
  • Fully vacuum-resistant with high-tech ceramic sensor material
  • Fused in-place Cermet or platinum electrodes
  • First EMF with ceramic measuring tube to comply with the Pressure Equipment Directive
  • High resistance to corrosion and temperature shocks
  • Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
  • Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
  • Available as flange or sandwich (wafer) version
  • No moving parts, no wear, no pressure loss
  • On-site verification of flowmeter with OPTICHECK service tool

Related products

IFC 100

Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors

  • Compact and wall-mounted housing
  • With many sensor and process diagnostics for standard requirements
  • 4-wire, 4…20 mA, pulse, frequency, status, HART®

OPTIFLUX 5000

Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters

  • Full bore design: pipe cross-section without restrictions
  • Connection sizes: DN2.5…300 / ⅒…120"
  • Tube material: Ceramic
Email
Contact