DK37 M8

Variable area flowmeter for advanced low liquid and gas flows

  • Mechanical or with electronic indicator (4…20 mA/HART®)
  • Sturdy metal design: stainless steel or alloy
  • Thread: G¼, ¼ NPT; others
  • -40…+150°C / +302°F; max. 220 barg / 3190 psig

Product variants

DK37 M8

DK37 M8

Variable area flowmeter for advanced low liquid and gas flows

  • Mechanical or with electronic indicator (4…20 mA/HART®)
  • Sturdy metal design: stainless steel or alloy
  • Thread: G¼, ¼ NPT; others
  • -40…+150°C / +302°F; max. 220 barg / 3190 psig

Product variants

DK37 M8

Overview

The DK37 M8 is a variable area (VA) flowmeter with electrical signal output and bargraph indication or mechanical indicator with two optional limit switches. The versatile all-metal measuring device is suitable for flow measurement of gases and liquids. Due to its sturdy design, the VA meter can be used at temperatures up to +200°C / +392°F or pressures up to 220 barg / 3190 psig. It is fitted with a needle valve as standard to accurately set the flow value.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Simple, low-cost installation: Able to measure and display without auxiliary power supply
  • Purgemeter with 2 optional limit switches or 4…20mA/HART® for flow monitoring
  • Various stainless steel and alloy sensor materials
  • Optional surface passivation with SilcoNert®2000 for trace-level analysis
  • PPS housing as standard, stainless steel housing as option
  • Ingress protection IP66/67
  • Full scale value for liquids: 1.6…250 l/h / 0.4…67 GPH
  • Full scale value for gases: 16…8,000 l/h / 0.6…300 SCFH
  • Turndown ratio 10:1
  • Maximum measuring error: ±2.5% (acc. to VDI/VDE 3513-2) or ±2% of full scale
  • Suitable for use in Safety Instrumented Systems with SIL 2, in redundant design (1oo2) also in SIL 3 applications (type A device)
  • Approved for hazardous areas
Email
Contact